Save A Battery | Compare our Chargers | Accessories | Charger Manuals | FAQS | How Batteries Work

Cigarette Lighter or Auxiliary Power Cable

The Cigarette Lighter or Auxiliary Power Cable connects to a vehicles built-in cigarette lighter connection or auxiliary input connector. Most of these connectors are on all the time and by simply plugging in our cable the battery will be charged and maintained. To test, first plug the charger or maintainer into AC power. Turn off the key then look at the Battery LED on the charger or maintainer and the LCD display on the Tester. These should all stay on when the key is turned off. Next, watch the Battery and Fault LEDs on the charger or maintainer, if connected properly to a battery that is chargeable, the Battery LED will come on and the Fault LED will not. If this does not happen there is either a problem with reverse polarity, a nonchargeable battery, or a short circuit. Disconnect the charger and inspect the cable immediately.

We offer two lengths, both 6’ and 20’, additionally you can run up to 30’ total cable length on any of our systems so our extension cables can be used to make the cable run longer if need be.