 HKS Turbo Timers |  |
HKS Turbo Timers are designed to extend turbocharger & engine life by allowing the turbo to cool down sufficiently before the engine is turned off. It does this simply by allowing the engine to continue running for a pre set period of time, after the ignition is turned “off”, and the car securely locked. If the engine is turned off whilst the turbocharger is red hot, the heat in the turbo will then fry the lubrication oil in the delicate bearings. It will also be transferred to the main engine, which has no circulation of cooling water, causing further mechanical damage.
HKS offer two models of turbo timer, details below.
|
 |
 | |
HKS Turbo Timer 0.
This is the basic Turbo Timer. The 'run-down' time can be set to one of 15 pre-set periods from 0 to 9.99 minutes. An audible 'beep' can be activated to register the count down period.
It also has a re-settable engine running time counter, to allow you to closely monitor the running time of your engine. (A more accurate record than simple mileage measurement). The Turbo Timer can also be used to display car battery voltage.
|
|
|
 | | HKS Turbo Timer 1.
This model has additional features. It can also be used as a stopwatch and digital rev counter or speedometer. As a combination of these additional functions, it can be used to measure time taken to reach pre set distance or speed points.
|
|
|
HKS Turbo Timer Harness.
To simplify the wiring connection to your vehicle, we can supply a custom made wiring harness for many vehicles.
|
| Hiper Damper Suspension Kits | |
 | |
HKS Hiper Damper Suspension Kits are a completely adjustable suspension system, designed specifically for each vehicle.
The ride height of the vehicle can be easily adjusted by moving the threaded spring abutment on the damper body.
The damping effect can be adjusted through ten positions by means of an external adjustment knob on the damper body. (Damper adjustments will equally effect bump and rebound settings).
Certain models will also have a camber adjustment facility with this kit
|
|
| Pillow Ball Top Suspension Mounts | |
 | |
In a road car suspension system, the upper mountings that connect the suspension strut or shock absorber to the chassis are usually made from soft rubber or plastic. These standard items are designed to give a soft ride, and to reduce the amount of road noise transmitted through into the vehicle. Under harder driving conditions, the original mountings can distort, affecting the performance and geometry of the suspension. This can cause the vehicle to loose traction, and steering response.
HKS Pillow Upper Mounts are constructed from aluminium and steel, which will not bend or flex. This ensures that the suspension performance is not compromised by additional, uncontrolled movement. As an added bonus, some Pillow Upper Mounts also have an integral camber adjuster, allowing subtle alterations to the suspension geometry.
|
|
| Super Form Spring Kits | |
 | |
HKS Super Form Spring Kits are manufactured from the highest quality materials available. They are stress shot-peened to relieve stress, and electrostatically powder coated to prevent corrosion.
The springs kits will reduce the ride height of the vehicle by approximately 30mm.
All springs are progressive rate springs. This means that at normal ride height the spring is relatively soft to give a comfortable ride and good traction in poor conditions. As the springs compress, the spring rate increases, reducing body roll under hard cornering, and dive under heavy braking.
|
|
|