Exhaust Systems

Exhaust Parts
GGR products have an unrivalled reputation for quality; the exhaust systems that we produce for the Cosworth range are yet another example of this policy.
Throughout the years, we have had the opportunity to inspect a number of different styles of exhaust system fitted to cars that we have had through our workshops. With our own design of system, we have endeavoured to avoid the mistakes made by other manufacturers.
Our own 3" bore systems are designed to fit closely to the underside of the vehicle, (to give maximum ground clearance), without actually fouling the chassis or suspension components, (which would lead to annoying vibrations, and eventually, damage to the exhaust or car). Our systems are manufactured completely of stainless steel, including the T. I. G. welded joints, (some systems are joined using corrosive mild steel!). The silencer cladding material is indestructible stainless steel wool, not glass fibre wadding (which can eventually compact into a solid mass, which will offer no sound deadening properties). The silencers used in our systems are also 3" bore, offering no additional restriction the exhaust gasses, (some 3" bore systems actually use 21/2" bore silencers!). The exhausts are also constructed using mandrel bent sections with the minimum of joints possible, (welded joints are sometimes required if bends need to be closer together than the machinery will allow). As a finishing touch, our systems for the Sierra and Sapphire Cosworth models feature a polished 31/2" diameter muffled tailpipe to remove the harshness from the exhaust note that large diameter tailpipes produce. Our Escort Cosworth systems terminate with an oval polished & rolled edge tailpipe that fits clearly through the original opening in the rear bumper.
For the later Cosworth models, (Sapphire 4x4 and Escort Cosworth), we can also offer an exhaust system complete with a non-restrictive sports catalytic converter. This will ensure that the exhaust emissions remain within current DOT exhaust emission test requirements, without any loss in performance.
The fitting of a GGR stainless steel exhaust system to your Cosworth will enhance the vehicle in many ways. The performance will be enhanced due to the less restrictive nature of our system. The visual impact of the car will be enhanced due to the quality of manufacture and high standard of fit of the system. The reliability of the car will be enhanced, as our totally stainless steel systems will never corrode. The sound of the car will also be enhanced, our systems emit a deeper mellow exhaust note, making the car sound like a Cosworth, without becoming overly noisy within the vehicle.
Exhaust Parts · Back to FAQs & Features · GGR Home
Correspondence/Requests
Sales Enquiries: sales@grahamgoode.com
Technical Enquiries: tech@grahamgoode.com
Tel: (+44) 0116 244 0080
Fax: (+44) 0116 244 0140

	Exhaust Parts

	GGR products have an unrivalled reputation for quality; the exhaust systems that we produce for the Cosworth range are yet another example of this policy. Throughout the years, we have had the opportunity to inspect a number of different styles of exhaust system fitted to cars that we have had through our workshops. With our own design of system, we have endeavoured to avoid the mistakes made by other manufacturers. Our own 3" bore systems are designed to fit closely to the underside of the vehicle, (to give maximum ground clearance), without actually fouling the chassis or suspension components, (which would lead to annoying vibrations, and eventually, damage to the exhaust or car). Our systems are manufactured completely of stainless steel, including the T. I. G. welded joints, (some systems are joined using corrosive mild steel!). The silencer cladding material is indestructible stainless steel wool, not glass fibre wadding (which can eventually compact into a solid mass, which will offer no sound deadening properties). The silencers used in our systems are also 3" bore, offering no additional restriction the exhaust gasses, (some 3" bore systems actually use 21/2" bore silencers!). The exhausts are also constructed using mandrel bent sections with the minimum of joints possible, (welded joints are sometimes required if bends need to be closer together than the machinery will allow). As a finishing touch, our systems for the Sierra and Sapphire Cosworth models feature a polished 31/2" diameter muffled tailpipe to remove the harshness from the exhaust note that large diameter tailpipes produce. Our Escort Cosworth systems terminate with an oval polished & rolled edge tailpipe that fits clearly through the original opening in the rear bumper. For the later Cosworth models, (Sapphire 4x4 and Escort Cosworth), we can also offer an exhaust system complete with a non-restrictive sports catalytic converter. This will ensure that the exhaust emissions remain within current DOT exhaust emission test requirements, without any loss in performance. The fitting of a GGR stainless steel exhaust system to your Cosworth will enhance the vehicle in many ways. The performance will be enhanced due to the less restrictive nature of our system. The visual impact of the car will be enhanced due to the quality of manufacture and high standard of fit of the system. The reliability of the car will be enhanced, as our totally stainless steel systems will never corrode. The sound of the car will also be enhanced, our systems emit a deeper mellow exhaust note, making the car sound like a Cosworth, without becoming overly noisy within the vehicle.
Exhaust Parts · Back to FAQs & Features · GGR Home
Correspondence/Requests Sales Enquiries: sales@grahamgoode.com Technical Enquiries: tech@grahamgoode.com Tel: (+44) 0116 244 0080 Fax: (+44) 0116 244 0140