 |
|
Pin # |
Colour |
Function |
Description |
| |
1 |
Red |
Vehicle Power In/Out |
If DashDAQ is connected via OBD2 cable, this is a source for vehicle power. If OBD2 is not connected, vehicle power must be applied here. |
| |
2 |
Orange |
Innovate InRx/ Serial Port 1 Rx |
Connect to pin 3 of PC DB-9 |
| |
3 |
Yellow |
Innovate OutTx/ Serial Port 2 Rx |
Connect to pin 2 of PC DB-9 |
| |
4 |
Blue |
Innovate OutRx/ Serial Port 2 Rx |
Connect to pin 3 of PC DB-9 |
| |
5 |
Brown |
Innovate InTx/ Serial Port 1 Tx |
Connect to pin 2 of PC DB-9 |
| |
6 |
Black |
Case Ground |
1Meg Ohm to Gnd. For cable shielding. Do not use as ground. |
| |
7 |
White |
Analog Input 2 |
0.0 to 5.0 Volt input |
| |
8 |
Pink |
5v @ 500ma Output |
Resettable fuse protected |
| |
9 |
Green |
Analog INput 1 |
0.0 to 5.0 Volt input |
| |
|
10 |
Shield |
Ground |
This is the signal ground. Connect to pin 5 of PC DB-9. |
DashDaq
